BLUE ORIGIN

Designer

• Design and develop 2D and 3D models and drawings for ruggedized electronics enclosures and sensor packages using PTC Creo View
• Create and maintain LRU and sensor/harness installation drawings, specifications, and interface control documents (ICDs)
• Apply Geometric Dimensioning and Tolerancing (GD&T) in accordance with ASME Y14.5 standards
• Manage drawing release, revision control, and configuration data within Windchill (PLM)
• Collaborate with electrical, thermal, and structural engineers to support electronics development and trade studies
• Validate design requirements through analysis, test, or inspection
• Provide technical guidance to manufacturing and assembly teams during hardware installation and integration
• Support design reviews (PDR, CDR) with documentation, drawing packages, and technical presentations
• Report on schedule milestones, technical status, and risks to engineering leadership
• Ensure all designs comply with aerospace materials, finishes, and treatment specifications

Technical Designer – Avionics

Full-stack Engineer

• Architect and own the full BSP software stack including boot ROMs, multi-level bootloaders, chip configuration, and platform initialization for custom SoCs/ASICs
• Define and drive the security boot architecture including secure boot, chain-of-trust, hardware root-of-trust, and key management strategies
• Design and implement power management frameworks including dynamic voltage/frequency scaling, power domain control, and low-power state transitions
• Develop debug and trace infrastructure (CoreSight, JTAG, SWD, ETM) to support silicon bring-up and system-level debugging
• Lead silicon bring-up activities on emulation platforms (Palladium, Zebu, Veloce), FPGA prototypes (Protium, ProFPGA, HAPS), and first silicon
• Define HAL and driver architecture for peripheral interfaces (SPI, UART, I2C, GPIO, DMA)
• Collaborate closely with ASIC teams to influence SoC architecture decisions and provide firmware requirements
• Establish coding standards, review processes, and verification strategies for embedded software
• Mentor senior and junior engineers; drive technical roadmap decisions
• Support pre-silicon validation using emulation and RTL simulation environments

Principal BSP Embedded Software Engineer – Silicon Systems

Supply Chain

• Support high-impact business reviews with C-suite executives, translating complex supply chain data into actionable insights.
• Transform innovative concepts into comprehensive strategies, supporting cross-functional teams to deliver measurable results that align with Blue Origin's mission.
• Craft world-class documentation and strategic communications that articulate our vision, operational frameworks, and performance metrics with clarity and precision.
• Demonstrate unparalleled ownership by identifying critical initiatives, driving their completion, and effectively delegating responsibilities across the organization.
• Oversee with support the strategic alignment and accountability of all supply chain functions, ensuring cohesive execution across procurement, engineering, logistics, and supplier ecosystems.
• Contribute to the design and implementation of sophisticated performance monitoring systems to evaluate and enhance the efficacy of supply chain operations.
• Orchestrate a robust cadence of strategic reviews at various intervals (daily, weekly, monthly, quarterly) to facilitate data-driven decision-making at the highest levels of the organization.
• Spearhead transformative initiatives to optimize supply chain processes, driving efficiency, cost reduction, and service excellence.
• Cultivate strong partnerships across departments, fostering a unified approach to achieving Blue Origin's ambitious goals.
• Lead the integration of AI, machine learning, and automation solutions to revolutionize supply chain operations, collaborating with internal experts and external partners.
• Deliver penetrating insights and forward-looking analyses to the executive team, informing critical business decisions and strategic pivots.

Supply Chain Manager

Engineering Manager

• Cost, schedule, and technical performance of the assemblies within the vehicle thermal subsystem, including baselining new thermal design concepts, maturing design definition and supporting DFX activities
• Technical, administrative, and performance management of a cross-functional thermal engineering team
• Development and maintenance of subsystem Integrated Master Schedule (IMS) and Estimate at Completion (EAC) cost tracking
• Establishment and maintenance of team processes to guide engineering activities and ensure quality deliverables aligned with critical path delivery
• Effective delegation of technical authority to team leads
• Mentorship and coaching of early and mid-career engineers, including onboarding of new team members
• Cross-functional collaboration with peer subsystem leads (Structures & Configuration, Fluids, Gas) and Systems Engineering
• Management of team focus on critical path technical challenges while maintaining cost and schedule discipline

Thermal Engineering Manager – Lunar Permanence

Hardware Engineer

• Responsible for the design and development of module and vehicle level thermal assemblies from conception through development through flight operations.
• Support internal or external development of thermal components and assemblies
• Work with multi-discipline product teams to mature module and vehicle designs
• Collaborate closely with the thermal analysis group
• Work with subsystem specifications, mission environments, and design and construction standards.
• Produce outputs including component specifications, test plans, test execution reports, and test reports.
• Analyze component and assembly thermal performance using a broad spectrum of analysis techniques from classical hand calculations to Thermal Desktop models.
• Develop short-term and long-term development plans.
• Make decisions on make or buy for thermal components.

Senior Thermal Hardware Engineer – Lunar Permanence

• Own supply chain performance within a Blue Origin Program.
• Develop and execute supply chain strategies, processes, and materials program plans to ensure performance, budget, and on-time delivery of Blue Origin products.
• Be the single-threaded interface with the Program Management Office to define program goals, manage risk, manage schedule and support escalations and problem solving.
• Ensure all Supply Chain functions are executing plans to achieve targets, track progress, and develop mitigations where performance is not aligned with expectations.
• Support financial management (i.e., EVMS, budgets, targets, working capital).
• Ensure the placement and receipt of all material requirements to meet strategies and plans in support of program requirements including complete material management and ownership (schedule, cost, Material EAC).
• Analyze data to determine the cause of deviations from performance expectations and develop improvement plans alongside Supply Chain Function leadership.
• Provide communication, reports, and presentations to Program and Supply Chain at all levels to ensure alignment and a clear understanding of progress, risks, and mitigations.

Data Scientist

• Partner with Human Resources and Enterprise Technology leadership to identify and prioritize data analytics opportunities
• Drive the implementation of time-bound data solutions aligned with project goals and stakeholder requirements
• Apply expertise in data science, natural language processing, and Generative AI to deliver tangible solutions within our Technical Human Resources environment
• Develop and deploy sophisticated data science models and algorithms to address specific business challenges
• Break down complex scientific projects into manageable hypotheses and deliverable solutions
• Collaborate across teams to ensure relevance and impact of your work
• Provide expert guidance on Generative AI implementation best practices

Senior Data Scientist, People Analytics

Human Resources

• Design, implement, and evolve the reward frameworks that attract and retain exceptional talent necessary to pioneer ambitious space exploration initiatives.
• Serve as a strategic advisor and compensation expert, helping establish compensation standards, methodologies, and incentive structures.
• Provide market insights and compensation strategy while ensuring all programs align with Blue Origin's mission and values.
• Influence executive-level decision-making and collaborate with key stakeholders to develop employee-centric rewards programs.
• Analyze compensation data and make recommendations based on industry intelligence to improve compensation strategies.

Senior Compensation Specialist

Mechanical Engineer

• Lead engineering scope to close including planning, design, structural analysis, engineering release, procurement, and test.
• Ownership of the entire design cycle of structure components, including conceptual and detailed design, trade studies, structural analysis, build, development testing, and qualification.
• Develop, release, and maintain a full CAD and drawing engineering definition package.
• Support procurement activities to support vehicle build schedules.
• Support integrated test objectives, data review, and reporting.
• Perform or facilitate emergent analysis for non-conformances.
• Participate in subsystem level testing including planning, execution, data reduction and analysis.
• Work with multi-functional teams across multiple work sites that include design, analysis, materials, processes, structures, fluids, systems, procurement, and manufacturing.

Structural Design Engineer III

Engineer

• Design multi-layer PCBs for mmWave and microwave RF, complex digital, mixed-signal and high power systems including FPGAs, Microcontrollers
• Develop PCB layouts for Digital/Analog/RF circuits with careful attention to impedance control, loss tangent, and electromagnetic compatibility
• Perform signal integrity analysis for high-speed digital interfaces (PCIe, DDR, Ethernet)
• Create component libraries, design rule checks (DRCs), and maintain design standards
• Collaborate with electrical engineers on component selection, schematic review, and design optimization
• Generate fabrication and assembly documentation including Gerber files, drill files, and assembly drawings
• Work with PCB fabricators and CM vendors to ensure manufacturability and resolve fabrication issues
• Support board bring-up activities, debugging hardware issues related to PCB design
• Design for space environment considerations including thermal management, radiation tolerance, and mechanical stress

Senior PCB Layout Engineer

• Take ownership of the full lifecycle of hardware from requirements definition through concept development, design, analysis, testing, qualification, and integration onto a launch vehicle
• Design, analyze, develop, and test primary and secondary metallic and composite structures
• Perform research, develop concepts, and run trade studies
• Create 3D models, detail part drawings, assemblies, installations, and interface control documents
• Create test plans, specifications, and other documentation for the development of flight hardware
• Provide technical guidance and on-site support for manufacturing, production, and integration activities
• Support configuration development and trade studies
• Take ownership of test planning, execution, data reduction, analysis, and authoring of test reports
• Work with cross-functional teams that are responsible for selecting materials, manufacturing processes, and suppliers to produce world class aerospace hardware
• Develop component specifications and manage suppliers
• Plan, coordinate, conduct tests, and review test data
• Participate in the development and purchase of new equipment and tooling
• Maintain and report on activity schedule, budget and technical status
• Coach, mentor and technically assist other engineers
• Identify opportunities for improvements and operational cost savings
• Work with spacecraft customers in a technical capacity
• Own spacecraft structural integration cycles
• Drive hardware discrepancies to resolution
• Prepare technical content and present to internal and external customers
• Complete hand calc and FEM analyses to report margins of safety for primary and secondary aerospace structures
• Perform access studies, loss of clearance analyses, vehicle clocking studies, and develop solutions to mission unique requirements
• Collaborate with internal and external teams throughout design, manufacturing, and mission integration.

Structural Design Engineer III – Payload Accommodations

Analyst

• Provide onsite engineering support during spacecraft integration to the launch vehicle
• Detailed hand calc and FEM analysis of primary and secondary aerospace structures
• Documentation of stress analysis to support release of engineering drawings/documents
• Deep understanding of repair methods and analytical practices for both composite and metallic structure
• Providing technical guidance on design concepts (risk vs. cost vs. performance)
• Maintain and report on production schedules, budgets and technical status
• Supporting cross organizational teams with input for production activities and configuration development
• Analysis checks for designers and junior structural analysts in stress/stability/fracture analysis and best practices
• Improving enterprise analysis capabilities such as creating process automation tools for model creation, strength checks, and analysis report generation

Structural Analyst III – Payload Accommodation

• Detailed hand calc and FEM analysis of primary and secondary aerospace structures
• Documentation of stress analysis to support release of engineering drawings / documents
• Deep understanding of repair methods and analytical practices for both composite and metallic structure
• Providing technical guidance on design concepts (risk vs. cost vs. performance)
• Maintain and report on production schedules, budgets and technical status
• Supporting cross organizational teams with input for production activities and configuration development
• Analysis checks for designers and junior structural analysts in stress/stability/fracture analysis and best practices
• Improving enterprise analysis capabilities such as creating process automation tools for model creation, strength checks, and analysis report generation

Structural Analyst III – Payload Accommodations

• Serve as the system responsible engineer (SRE) for production jettison and separation systems on a launch vehicle payload fairing.
• Own end-to-end production engineering for pyrotechnic and ordnance-actuated separation mechanisms.
• Lead anomaly resolution and root cause investigations for production hardware nonconformances.
• Drive certification activities and interface with regulatory bodies and customer organizations.
• Develop and maintain system-level documentation including interface control documents, specifications, and acceptance criteria.
• Resolve structural margin and loads issues related to separation system interfaces.
• Provide manufacturing and production support for ordnance-based mechanical systems.
• Coordinate with suppliers on ordnance components, energetic devices, and custom mechanical assemblies.
• Support launch preparation, engineering support requests, and flight readiness activities.
• Work with cross-functional teams responsible for selecting materials, manufacturing processes, and suppliers to produce world class aerospace hardware.
• Maintain and report on schedule, budget, and technical status.
• Coach, mentor, and technically assist other engineers.
• Identify opportunities for improvements and operational cost savings.

Senior Mechanical Engineer

SDET

• Develop and author Test Plans, Test Procedures, and Test Results.
• Consult with design engineers or subject matter experts to determine test requirements.
• Conduct hands-on explosive, shock, vibration, thermal, humidity and vacuum testing on flight hardware in accordance with AIAA-S113A, MIL-STD-810, SMC-S-016 and MIL-STD-1540.
• Lead the conduct of Test Design Reviews, Integration Readiness Reviews, and Test Readiness reviews.
• Design and develop Special Test Equipment (STE) and integrate Ground Support Equipment (GSE) to simulate and stimulate Articles Under Test (AUTs) or capture AUT output and interface performance.
• Operate test consoles and work with a team of engineers & technicians to execute component level testing.
• Ensure all operations are performed safely, on time and in a professional manner.
• Work with test, flight and safety critical hardware, tools, and shop equipment.
• Maintain cleanliness of test equipment and testing area.
• Conduct and/or oversee several test projects simultaneously while supporting operation schedules.
• Configure test setups, fixtures and instrumentation per test plans and standards.
• Identify, communicate, and mitigate cost, schedule, and technical risks.
• Participate in development and gated design reviews of system under test to implement testability, instrumentation, and operability features during the design phase to facilitate verification.
• Coordinate with suppliers on acquisition of requisite GSE and STE while leveraging standard commercial devices to the maximum extent possible.
• Have frequent inter-organizational and customer interactions on difficult technical issues.
• Work independently to determine and develop approaches to solutions.
• Contribute to the mentoring & training of other personnel.

Technical Designer – Avionics

Principal BSP Embedded Software Engineer – Silicon Systems

Supply Chain Manager

Thermal Engineering Manager – Lunar Permanence

Senior Thermal Hardware Engineer – Lunar Permanence

Supply Chain Manager

Senior Data Scientist, People Analytics

Senior Compensation Specialist

Structural Design Engineer III

Senior PCB Layout Engineer

Structural Design Engineer III – Payload Accommodations

Structural Analyst III – Payload Accommodation

Structural Analyst III – Payload Accommodations

Senior Mechanical Engineer

Mechanical Test Engineer III