BLUE ORIGIN

Analyst

• Ability to solve a variety of static and dynamic structural problems using physics-based analytical methods (hand calculations, in-house tools, and 3rd party commercial analytical tools)
• Acceleration, shock, and vibration measurement and data interpretation of ground and flight tests
• Modeling, simulation, and verification of spacecraft launch, in-space burns, and landing events
• Finite Element Model development, refinement, validation, and correlation to tests
• General loads development for spacecraft and related ground systems
• Support configuration development and trade studies
• Femap, NASTRAN, and Matlab proficiency
• Support configuration development and trade studies
• Rigid and flexible body dynamics

Structural Analyst II – Lunar Permanence

• Ability to solve a variety of static and dynamic structural problems using physics-based analytical methods (hand calculations, in-house tools, and 3rd party commercial analytical tools)
• Acceleration, shock, and vibration measurement and data interpretation of ground and flight tests
• Modeling, simulation, and verification of spacecraft launch, in-space burns, and landing events
• Finite Element Model development, refinement, validation, and correlation to tests
• General loads development for spacecraft and related ground systems
• Support configuration development and trade studies

Structural Analyst III – Loads & Dynamics

• Own full-vehicle structural analysis from concept through qualification, including assumptions, modeling approach, documentation, and margin closure
• Develop, maintain, and execute finite element models (FEM) at component, subsystem, and vehicle level; ensure model configuration control and traceability
• Operate Hyper-X for analysis workflows and deliverables; integrate tool outputs into substantiation and reporting
• Perform structural assessments across relevant environments, as applicable: Quasi-static and inertial loads, Coupled loads analysis (CLA) support, Modal, random vibration, sine vibration, acoustic, and shock response, Buckling, stiffness/deflection, load path validation
• Create and review stress reports, substantiation packages, and certification/qualification artifacts (methods, results, margins, sensitivities)
• Conduct hand calculations to validate FEM results and support rapid trades
• Evaluate and uprate existing structures to carry higher loads, including: Identifying limiting load paths, local hot spots, and driving failure modes, Reanalyzing updated load cases and environments, updating margins, and documenting impacts, Recommending and substantiating reinforcement/redesign options (doublers, stiffeners, thicker gages, joint redesign, material changes, interface updates)
• Supporting retrofit/repair dispositions and verification plans (analysis and/or test)
• Partner with design, systems, loads & dynamics, thermal, manufacturing, and test to: Define analysis requirements and acceptance criteria, Support hardware builds and resolve nonconformances (MRB analysis support as needed), Drive structural risk retirement via testing and correlation
• Support design trades (mass, stiffness, frequency, packaging, manufacturability) and provide actionable recommendations early in the design cycle
• Mentor junior analysts and contribute to improving team standards, templates, and analysis best practices

Structural Analyst III – Lunar Permanence

Designer

• Design and testing of primary and secondary structures, including composites and metallic piece parts, as well as integrated structural assemblies.
• Create 3D models, detail part drawings, assemblies, installations, and interface control documents
• Support configuration development and trade studies
• Apply practical approaches to hardware fabrication and cost impacts
• Work with vertically integrated teams that are responsible for materials, manufacturing processes, to produce world-class aerospace hardware.

Structural Designer I – Lunar Permanence

• Own full-vehicle structural analysis from concept through qualification
• Develop, maintain, and execute finite element models (FEM) at component, subsystem, and vehicle level
• Operate Hyper-X for analysis workflows and deliverables
• Perform structural assessments across relevant environments
• Create and review stress reports, substantiation packages, and certification/qualification artifacts
• Conduct hand calculations to validate FEM results and support rapid trades
• Evaluate and uprate existing structures to carry higher loads
• Partner with design, systems, loads & dynamics, thermal, manufacturing, and test to define analysis requirements and acceptance criteria

Senior Structural Analyst – Lunar Permanence

• Own full-vehicle structural analysis from concept through qualification, including assumptions, modeling approach, documentation, and margin closure
• Develop, maintain, and execute finite element models (FEM) at component, subsystem, and vehicle level; ensure model configuration control and traceability
• Operate Hyper-X for analysis workflows and deliverables; integrate tool outputs into substantiation and reporting
• Perform structural assessments across relevant environments, as applicable: Quasi-static and inertial loads Coupled loads analysis (CLA) support Modal, random vibration, sine vibration, acoustic, and shock response Buckling, stiffness/deflection, load path validation
• Create and review stress reports, substantiation packages, and certification/qualification artifacts (methods, results, margins, sensitivities)
• Conduct hand calculations to validate FEM results and support rapid trades
• Evaluate and uprate existing structures to carry higher loads, including: Identifying limiting load paths, local hot spots, and driving failure modes Reanalyzing updated load cases and environments, updating margins, and documenting impacts Recommending and substantiating reinforcement/redesign options (doublers, stiffeners, thicker gages, joint redesign, material changes, interface updates)
• Supporting retrofit/repair dispositions and verification plans (analysis and/or test)
• Partner with design, systems, loads & dynamics, thermal, manufacturing, and test to: Define analysis requirements and acceptance criteria Support hardware builds and resolve nonconformances (MRB analysis support as needed)
• Drive structural risk retirement via testing and correlation
• Support design trades (mass, stiffness, frequency, packaging, manufacturability) and provide actionable recommendations early in the design cycle
• Mentor junior analysts and contribute to improving team standards, templates, and analysis best practices.

• Design and testing of primary and secondary structures, including composites and metallic piece parts.
• Create 3D models, detail part drawings, assemblies, installations, and interface control documents.
• Support configuration development and trade studies.
• Apply practical approaches to hardware fabrication and cost impacts.
• Work with vertically integrated teams that are responsible for materials and manufacturing processes.

Structural Designer II – Lunar Permanence

Engineer

• Prediction of Engine shock, vibration, and acoustic environments
• Review and interpret shock, vibration, and acoustic measurements from hot-fire and flight data
• Derive dynamic environment levels and generate associated documentation, specifications, and requirements
• Develop, plan, supervise, and verify component environments tests (e.g., vibration, acoustic, and shock tests) to validate analytical predictions
• Develop and improve tools and methods for efficient data processing and reduction of test and flight environments
• Work closely with test, instrumentation, and systems engineering teams to ensure adequate, well-placed, and high-quality measurements are acquired during ground and flight testing

Dynamic Environments Engineer II

Architect

• Develop models and algorithm for Terawave Custom Silicon: This includes packet processing, MAC, PHY, Radio Drive for lowest power consumption and highest performance
• Target Hardware and Software algorithms for FPGA and ASIC implementation
• Support the ASIC and SW implementation thru pre-silicon verification and post silicon productization
• Design advanced Digital multi-beam beamforming Phased array systems
• Architect and model optimized RF transceivers for the TeraWave system
• Drive block level RF and AMS specifications in collaboration with the RFIC designers
• Develop and model impairments compensation and system calibration methods for the Custom Silicon and Phased Array design
• Work collaboratively with ASIC, RFIC and Software implementation teams
• Work with the application team to bring up prototype pre-silicon and support all post-silicon to validate your architecture performance

Principal System Architect, RF SoC

• Plan, execute, review and deliver high-quality thermal analysis products to inform the sizing and performance of module or vehicle level assemblies.
• Provide high level thermal insight to integrated trade and configuration studies
• Contribute to thermal analysis reports deliverable to NASA
• Review and approve the analysis of junior thermal engineers
• Develop automation schemes to improve analysis cycle times and accuracy through the use of conventional and GenAI tool sets
• Practice rigorous model revision control using GITLAB

Thermal Analyst III – Lunar Permanence

• Develop models and algorithm for the TeraWave Custom Silicon
• Support the ASIC implementation thru Pre-silicon verification
• Design advanced Digital end to end communication systems
• Develop and model Channel impairments models
• Work collaboratively with ASIC, RFIC and SW implementation teams
• Work with the application team to Bring up prototype pre-silicon and support all post-silicon to validate your architecture performance

Senior Comsys and DSP Architect

• Develop models and algorithm for the TeraWave Custom Silicon
• This includes packet processing, MAC, PHY, Radio DSP
• Drive for lowest power consumption and highest performance
• Target your algorithms for FPGA and ASIC implementation
• Support the ASIC implementation thru Pre-silicon verification
• Design advanced Digital end to end communication systems
• Develop and model Channel impairments models
• Work collaboratively with ASIC, RFIC and Software implementation teams
• Work with the application team to bring up prototype pre-silicon and support all post-silicon to validate your architecture performance

Comsys & DSP Engineer II – TeraWave

SDET

• Aspects of applied test engineering including the design, analysis, and operation of test systems for testing fluid, propulsion, mechanical and electronic systems
• Projects will include the integration of safety, manufacturing, operations, materials and processes, instrumentation, test control systems, and systems engineering
• Analyzing test data to support requirements verification tasks
• Directing integration of hardware into our test facilities
• Conducting test planning, risk assessments, evaluation, and mitigations, test set up, execution, post-test data review, and performance analysis
• Developing test support software and equipment to improve test frequency and quality
• Identifying, scoping, and resolving test-related problems.

Test Engineer I – Early Career

Technical Project Manager

• Lead strategic supply chain initiatives for various spaceflight systems
• Provide detailed analysis of the capability, capacity, and resource requirements necessary to vertically integrate critical components
• Deep dive the specific challenges of a process and communicating relevant information for senior leadership evaluation
• Develop reliable and repeatable processes to streamline data collection and analysis for evaluating resources, costs, cycle times, and lead times

Structural Analyst II – Lunar Permanence

Structural Analyst II – Lunar Permanence

Structural Analyst III – Loads & Dynamics

Structural Analyst III – Lunar Permanence

Structural Designer I – Lunar Permanence

Senior Structural Analyst – Lunar Permanence

Structural Analyst III – Lunar Permanence

Structural Designer II – Lunar Permanence

Dynamic Environments Engineer II

Principal System Architect, RF SoC

Thermal Analyst III – Lunar Permanence

Senior Comsys and DSP Architect

Comsys & DSP Engineer II – TeraWave

Test Engineer I – Early Career

Senior Technical Project Manager – Vertical Integration Strategy and Execution